Clear Ipv6 Traffic - Edge-Core Direk Tronik 24/48-Port Management Manual

60
IPv6 Interface Commands
Field
UDP Statistics
input
checksum errors
length errors
no port
dropped
output
TCP Statistics
input
checksum errors
output
retransmitted

clear ipv6 traffic

This command resets IPv6 traffic counters.
Command Mode
Privileged Exec
Command Usage
This command resets all of the counters displayed by the show ip traffic
command.
Example
Console#clear ipv6 traffic
Console#
60-20
Table 60-4 show ipv6 traffic - display description
Description
The total number of UDP datagrams delivered to UDP users.
The total number of UDP packet checksum errors.
The total number of UDP header length errors.
The total number of received UDP datagrams for which there was no application
at the destination port.
The number of times the system encounter an error when trying to queue the
received packet.
The total number of UDP datagrams sent from this entity.
The total number of segments received, including those received in error. This
count includes segments received on currently established connections.
The total number of TCP packet checksum errors.
The total number of segments sent, including those on current connections but
excluding those containing only retransmitted octets.
The total number of segments retransmitted - that is, the number of TCP segments
transmitted containing one or more previously transmitted octets.