Monitor-A Display Mode - Omron 3G3RX User Manual

3-4 Operation

4- Monitor-A Display Mode

1- Please select monitor mode A by using the
navigation layer. The cursor will be displayed in the Monitor-A pressing
the key.
3
2- After that, use the
displayed into the Monitor-A.
Use or key to move the cursor to the function code (F001 in
this case) and use the
3- Use the key to access to the function code value. With the
or key the value can be changed. The changes will be stored
after pressing the
3-9
or key to select the function code to be
or key to change the function code.
key or cancelled pressing the
or key at the
key.