Omron 3G3RX User Manual page 313

Register
Function name
No.
1307h
Frequency matching lower
limit frequency setting
1308h
1309h Trip retry selection
Undervoltage retry time
130Ah
selection
Overvoltage/overcurrent
130Bh
retry time selection
130Ch Trip retry wait time
130Dh Electronic thermal level
Electronic thermal
130Eh
characteristics selection
130Fh Not used
Free setting, electronic
1310h
thermal frequency 1
Free setting, electronic
1311h
thermal current 1
Free setting, electronic
1312h
thermal frequency 2
Free setting, electronic
1313h
thermal current 2
Free setting, electronic
1314h
thermal frequency 3
Free setting, electronic
1315h
thermal current 3
1316h Overload limit selection
1317h Overload limit level
1318h Overload limit parameter
Function
R/W Monitor and setting parameters
code
b007
R/W
(HIGH)
0.00 to 400.00
b007
R/W
(LOW)
00: TRIP (Alarm)
01: 0-Hz start
02: f-match (Frequency matching start)
b008 R/W 03: f-match Trip (Trip after frequency
matching deceleration stop)
04: Actv. f-match (Active Frequency
Matching restart)
00: 16 times
b009 R/W
01: No limit
b010 R/W 1 to 3
b011 R/W 0.3 to 100.0
0.20 x Rated current to 1.00 x Rated
b012 R/W
current
00: Reduced TRQ (Reducted torque
characteristics)
b013 R/W 01: Const TRQ (Constant torque
characteristics)
02: Free set (Free setting)
 
b015 R/W 0 to 400
b016 R/W 0.0 to Rated current
b017 R/W 0 to 400
b018 R/W 0.0 to Rated current
b019 R/W 0 to 400
b020 R/W 0.0 to Rated current
00: OFF (Disabled)
01: ON-Acc/Cnst (Enabled in
acceleration/constant speed
operation)
b021 R/W 02: ON-Cnst (Enabled during constant
speed operation)
03: ON-A/C (R) (Enabled in acceleration/
constant speed operation
(accelerates during regeneration))
0.20 x Rated current to 2.00 x Rated
current (0.4 to 55 kW)
b022 R/W
0.20 x Rated current to 1.80 x Rated
current (75 to 132 kW)
b023 R/W 0.10 to 30.00
4-4 Communication Function
Resolu-
tion
0.01
[Hz]

4


0.1 [s]
0.1 [A]


1 [Hz]
0.1 [A]
1 [Hz]
0.1 [A]
1 [Hz]
0.1 [A]

0.1 [A]
0.01 [s]
4-194