Omron 3G3RX User Manual page 95

Parameter
Function name
No.
Selection of non-stop
function at
b050
momentary power
interruption
Starting voltage of
non-stop function at
b051
momentary power
interruption
Stop deceleration
level of non-stop
b052 function at
momentary power
interruption
Deceleration time of
non-stop function at
b053
momentary power
interruption
Deceleration starting
width of non-stop
b054 function at
momentary power
interruption
Proportional gain
setting of non-stop
b055 function at
momentary power
interruption
Integral time setting
of non-stop function
b056
at momentary power
interruption
* 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001
to C008.
Monitor or data range
00: OFF (Disabled)
01: V-Cnst (STOP) (Enabled (deceleration
stop))
02: NS1 (Enabled (without recovery))
03: NS2 (Enabled (with recovery))
0.0 to 1000.0
0.0 to 1000.0
0.01 to 3600.00
0.00 to 10.00
0.00 to 2.55
0.000 to 65.535
3-9 Parameter List
Changes
Default
during Unit Page
setting
operation

00 No
220/
No V
440
360/
No V
720
4-60
1.00 No s
0.00 No Hz

0.20 Yes
0.100 Yes s 4-63
3-36
3