Omron 3G3RX User Manual page 279

<Command 09>
Checks if a set value can be stored in EEPROM.
•Transmission frame
Frame format
STX Station No.
Description
STX Control code (Start of TeXt)
Station No. Station No. of the target Inverter
Command Transmission command
BCC Block check code
CR Control code (Carriage Return)
•Response frame
Frame format
STX Station No.
Description
STX Control code (Start of TeXt)
Station No. Station No. of the target Inverter
ACK Control code (ACKnowledge)
Data Data
BCC Block check code
CR Control code (Carriage Return)
Negative response: Refer to page 4-161.
<Command 0A>
Stores a set value in EEPROM.
•Transmission frame
Frame format
STX Station No.
Description
STX Control code (Start of TeXt)
Station No. Station No. of the target Inverter
Command Transmission command
BCC Block check code
CR Control code (Carriage Return)
•Response frame
Positive response: Refer to page 4-161.
Negative response: Refer to page 4-161.
Command BCC
Data size
1 byte
2 bytes
2 bytes
2 bytes
1 byte
ACK Data
Data size
1 byte
2 bytes
1 byte
2 bytes
2 bytes
1 byte
Command BCC
Data size
1 byte
2 bytes
2 bytes
2 bytes
1 byte
4-4 Communication Function
CR
Setting
STX (0x02)
01 to 32
09
Exclusive OR from station No. to
data. (Refer to page 4-163.)
CR (0x0D)
BCC CR
Setting
STX (0x02)
01 to 32
ACK (0x06)
01: Enabled
Exclusive OR from station No. to
data. (Refer to page 4-163.)
CR (0x0D)
CR
Setting
STX (0x02)
01 to 32
0A
Exclusive OR from station No. to
data. (Refer to page 4-163.)
CR (0x0D)
4
4-160