Omron 3G3RX User Manual page 417

Parameter
Function name
No.
Window comparator
O upper limit level
b060
[Windw comp [O]
max]
Window comparator
b061 O lower limit level
[Windw comp [O] min]
Window comparator
b062 O hysteresis width
[Windw comp [O] hys]
Window comparator
OI upper limit level
b063
[Windw comp [OI]
max]
Window comparator
OI lower limit level
b064
[Windw comp [OI]
min]
Window comparator
OI hysteresis width
b065
[Windw comp [OI]
hys]
Window comparator
O2 upper limit level
b066
[Windw comp [O2]
max]
Window comparator
O2 lower limit level
b067
[Windw comp [O2]
min]
Window comparator
O2 hysteresis width
b068
[Windw comp [O2]
hys]
Analog operation
level at O
b070
disconnection
[Discon Level [O]]
Analog operation
level at OI
b071
disconnection
[Discon Level [OI]]
Analog operation
level at O2
b072
disconnection
[Discon Level [O2]]
* 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001
to C008.
Monitor or data range
Set an upper limit level.
Setting range: 0 to 100
Lower limit: Lower limit level + Hysteresis
width × 2
Set a lower limit level.
Setting range: 0 to 100
Upper limit: Upper limit level - Hysteresis
width × 2
Set a hysteresis width for the upper and lower
limit levels.
Setting range: 0 to 10
Upper limit: (Upper limit level - Lower limit
level) × 2
Set an upper limit level.
Setting range: 0 to 100
Lower limit: Lower limit level + Hysteresis
width × 2
Set a lower limit level.
Setting range: 0 to 100
Upper limit: Upper limit level - Hysteresis
width × 2
Set a hysteresis width for the upper and lower
limit levels.
Setting range: 0 to 10
Upper limit: (Upper limit level - Lower limit
level) × 2
Set an upper limit level.
Setting range: -100 to 100
Lower limit: Lower limit level + Hysteresis
width × 2
Set a lower limit level.
Setting range: -100 to 100
Upper limit: Upper limit level - Hysteresis
width × 2
Set a hysteresis width for the upper and lower
limit levels.
Setting range: 0 to 10
Upper limit: (Upper limit level - Lower limit
level) × 2
0 to 100/no (ignored)
0 to 100/no (ignored)
-100 to 100/no (ignored)
Appendix-1 Parameter List
Changes
Default
during Unit
setting
operation
100 Yes %
0 Yes %
0 Yes %
100 Yes %
0 Yes %
0 Yes %
100 Yes %
-100 Yes %
0 Yes %

no No

no No

no No
App-22
Page
4-66
4-66