Omron 3G3RX User Manual page 200

4-2 Function Mode
Parameter
Data
No.
4
C001 to
C008
•You can select NO- or NC-contact input for each multi-function input terminal.
Parameter
No.
C011 to Multi-function input 1 to
C018 8 operation selection
FW terminal operation
C019
Related functions
4-81
Function name
55 FOC : Preliminary excitation
56 MI1 : Drive Programming input 1
57 MI2 : Drive Programming input 2
58 MI3 : Drive Programming input 3
59 MI4 : Drive Programming input 4
60 MI5 : Drive Programming input 5
61 MI6 : Drive Programming input 6
62 MI7 : Drive Programming input 7
63 MI8 : Drive Programming input 8
65 AHD : Analog command held
66 CP1 : Position command selection 1
67 CP2 : Position command selection 2
68 CP3 : Position command selection 3
69 ORL : Zero return limit signal
70 ORG : Zero return startup signal
71 FOT : Forward driving stop
72 ROT : Reverse driving stop
73 SPD : Speed/Position switching
74 PCNT : Pulse counter
75 PCC : Pulse counter clear
82 PRG : Drive program start
no NO : No allocation
Function name
00: NO
01: NC
• You can set NO- and NC-contact inputs
individually for multi-function input terminals 1 to 8
and the FW terminal.
• NO contact: "ON" with the contact closed, "OFF"
with the contact open.
• NC contact: "ON" with the contact open. "OFF"
selection
with the contact closed.
• A terminal with reset (RS) setting function only can
be set as NO contact.
Reference item
Preliminary excitation function
Drive Programming input 1 to 8
Analog command held
Absolute position control mode
Multi-function pulse counter
Drive program start

Data
C001 to C008
Page
4-119

4-93
4-139

4-142
4-140
4-94


Default
Unit
setting

00

00