Table of Contents
Advertisement
Chapter 19 System Utility Function Setting
System Time
The system time is displayed at the lower-right side of the screen in "hh:mm
(hour:minute)" format. When you save the waveform, the output file will contain the
time information.
Press Utility More More Time to open the time setting menu.
1. Set the System Time
(1) Press Show Time to open or close the system time interface.
(2) Set "year": Press Year, rotate the multifunction knob
or use the pop-up numeric keypad to input the numeric value to set it.
(3) Set "month": Press Month, rotate the multifunction knob
set it or use the pop-up numeric keypad to input the numeric value to set it.
(4) Set "day": Press Day, rotate the multifunction knob
use the pop-up numeric keypad to input the numeric value to set it.
(5) Set "Hour": Press Hour, rotate the multifunction knob
or use the pop-up numeric keypad to input the numeric value to set it.
(6) Set "Minute": Press Minute, rotate the multifunction knob
set it or use the pop-up numeric keypad to input the numeric value to set it.
The setting range of each item of the system time conforms to the convention.
Year: 2017 to 2099
Month: 01 to 12
Date: 01 to 31 (28, 29, or 30)
Hour: 00 to 23
Minute: 00 to 59
Second: 00 to 59
2. Apply the Currently Set System Time
Press Apply to validate the current settings. The time at the lower-right side of
the screen will be updated.
Default Option
Used for configuring the Default key.
Press Utility More More Default Option, then enter the default option
menu. Press Keep Impedance to enable or disable the impedance keep function. If
you select ON, after you press Default, the impedance value that you set remains
unchanged and other settings will be restored to the default settings. If you select
OFF, after you press Default, the impedance value will be restored to its default
value 1 MΩ.
MSO7000/DS7000 User Guide
RIGOL
directly to set it
directly to
directly to set it or
directly to set it
directly to
19-19
Advertisement
Table of Contents
