Chapter 8 Reference Waveform
To Set the Color
DS1000Z-E series oscilloscope provides five colors (light gray, green, light blue,
magenta and orange) to mark the reference waveforms of different channels in order
to distinguish them.
Press Current and use
enabled. Then, press Color to specify a different color for the reference waveform of
that channel. The corresponding icon at the left of the channel currently selected will
be filled with the specified color, for example,
To Reset the Reference Waveform
Press Reset and the reference waveform returns to the position where the source
channel waveform is located when the Save operation was executed.
To Export to Internal or External Memory
Users can also save the reference waveform to the internal flash memory or external
USB storage device. The file format of the reference waveform is "*.ref".
Note:
format.
Press Export to enter the file store interface. Please refer to the relative descriptions
in "Store and Recall" to save the reference waveform to the internal or external
memory.
To Import from Internal or External Memory
Users can also import the reference waveform stored in the internal flash memory or
external USB storage device to the internal memory.
Note:
format.
Press Import to enter the file recall interface. Please refer to the relative
descriptions in "Store and Recall" to import the reference waveform to the internal
memory of the instrument.
DS1000Z-E User Guide
Find Quality Products Online at:
to select any of the reference channels (Ref1-Ref10)
DS1000Z-E only supports the flash memory USB storage device of FAT32
DS1000Z-E only supports the flash memory USB storage device of FAT32
GlobalTestSupply
www.
.
.com
sales@GlobalTestSupply.com
RIGOL
8-3