To Set The Color; To Select Ref Source; To Save To Internal Memory - Rigol DS2000 Series User Manual

8 Reference Waveform

To Set the Color

DS2000 series oscilloscope provides five colors (gray, green, light blue, magenta and
orange) to mark the reference waveforms of different channels in order to distinguish
them.
Press Current and use
enabled. Then, press Color to specify a different color for the reference waveform of
that channel. The corresponding icon at the left of the channel currently selected will
be filled with the specified color, for example,

To Select REF Source

Press Current and use
enabled and then press Source to specify a reference source (CH1, CH2 or MATH)
for this channel.

To Save to Internal Memory

Press Save to save the waveform (screen region) in the specified source to internal
memory as reference waveform and display it on the screen. Note that this operation
only saves the reference waveform in the volatile memory and the waveform will be
cleared at power-off.
DS2000 User's Guide
to select any of the reference channels (Ref1-Ref10)
to select any of the reference channels (Ref1 to Ref10)
.
RIGOL
8-3