To Select The Digital Channel; To Move The Digital Channel - Rigol MSO2000A Series User Manual

RIGOL

To Select the Digital Channel

Press LA  CH/Group, rotate the multifunction knob
digital channels or user-defined digital channel groups. You can also press
CH/Group continuously or
D0-D15: select any channel of D0-D15. The channel label and waveform

corresponding to the channel selected are displayed in red.
Group1-Group4: select any of the user-defined groups Group1-Group4. The

channels labels of all the channels of the channel group selected are displayed in
red and the waveform of the first channel of the channel group selected is
displayed in red.
None: do not select any channel or channel group.

Note: Only digital channel or user-defined groups that are turned on can be
selected.
For how to turn on the digital channel/group, please refer to the introduction in "To
Turn on/off the Digital Channel".
For how to define channel group, please refer to the introduction in "Group Set".

To Move the Digital Channel

Press LA 
the desired position.
Note:
When any of the user-defined channel groups Group1-Group4 is currently
selected, all the channels in the group will move when you rotate
7-2
nd Quality Products Online at:
to switch among the options in order.
and rotate to move the channel/group currently selected to
GlobalTestSupply
www.
Chapter 7 Digital Channel
to select any of the
.
MSO2000A/DS2000A User's Guide
.com
sales@GlobalTestSupply.co