Importing Using Stored File Manager 3 - Fuji Xerox ApeosPort-VI C7771 User Manualline

Computer Operations

Importing Using Stored File Manager 3

The following describes how to use Stored File Manager 3 to import files from a machine's
folder.
Stored File Manager 3 is software to import files from a machine's folder to a computer
without using any client-side application.
To use Stored File Manager 3, your computer must have Network Scanner Utility 3 installed.
Note
Reference
1
Click [Start] and select [Programs] > [Fuji Xerox] > [Network Scanner Utility 3] > [Stored File
Manager 3].
Note
2
From the displayed list, click the scanner name of the machine, and click [Next].
12
Note
528
Network Scanner Utility 3 is included in the Media(Software/Product Manual).
When Secondary Ethernet (optional) is installed on the machine and the IP address of Ethernet2 is specified,
Network Scanner Utility 3 cannot operate. For more information, refer to "Tools" > "Connectivity & Network
Setup" > "Protocol Setup" > "TCP/IP - Network Settings (Ethernet 2)" in the Administrator Guide.
To import files stored in a folder, prior settings are required, such as enabling ports. For more information, refer to "Scanner
Environment Settings" > "Configuration of Store to Folder" in the Administrator Guide. For information on the operation of the
application, refer to the documentation provided with the application.
For information on how to install Stored File Manager 3, refer to the Media Information included in the
Media(Software/Product Manual).
To learn about fields in the displayed dialog box, click [Help] to view the Stored File Manager 3 help.
If you used another directory for installation, specify the directory instead.
If no scanners are shown in the list, click [Search Again]. The application searches for scanners.
To change the display of scanner names, use the dialog box that appears by clicking [Search/Display
Settings]. For more information, refer to "Changing the display of scanner names" (P.531).
Only when the machine is connected to the network, the scanner name is automatically listed. To view the
machine connected to another network, click [Search/Display Settings] and register the IP address and
scanner name. For information on how to change the settings, refer to "Changing the display of scanner
names" (P.531).