Fuji Xerox ApeosPort-VI C7771 User Manualline page 303

Document Feeder
The document feeder supports single and multiple sheet documents with sizes from 125 x
85 mm (Standard size: A5, A5 ) to 297 x 432 mm (Standard size: A3, 11 x 17").
Note
When Duplex Automatic Document Feeder C1-PC is installed, the minimum supported size for the original
document is 84 x 139.7 mm (Standard size: A6).
The document feeder automatically detects standard size documents. For non-standard
size documents, enter the size on the [Original Size] screen.
Reference
For information on document sizes that can be detected automatically and how to enter a non-standard document size, refer to
"Original Size (Specifying a Scan Size)" (P.399).
The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the
System Administration mode. For information on paper size settings, refer to "Tools" > "Common Service
Settings" > "Other Settings" > "Paper Size Settings" in the Administrator Guide.
The document feeder accepts the following number of sheets.
Document Type
(Weight)
Lightweight paper (38 -
49 gsm)
Plain paper (50 - 80 gsm)
Heavyweight paper (81 -
128 gsm)
Heavyweight paper (129
- 200 gsm)
Important
To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted documents,
curled paper, or back carbon paper.
2-sided scanning of lightweight paper (38 - 49 gsm) is not supported.
Reference
For information on how to scan mixed sized documents, refer to "Mixed Size Originals (Scanning Different Size Documents
Simultaneously)" (P.400).
1
Remove any paper clips and staples before loading a document.
Number of Sheets
Duplex Automatic
Document FeederB1-PC
130 sheets
130 sheets
85 sheets
-
Scanning Procedure
Duplex Automatic
Document Feeder C1-PC
250 sheets
250 sheets
150 sheets
100 sheets
5
303