Fuji Xerox ApeosPort-VI C7771 User Manualline page 289

F Code Method
You can perform Relay Broadcast by registering the relay station's F code and password (if
necessary) to the machine.
Note
When performing Relay Broadcast with the F Code method, you can use a password if you set a receive
password for the relay station.
When performing Relay Broadcast between Fuji Xerox manufactured machines that can be used as both an
initiating station and a relay station, we recommend that you use the fax signal method.
Confirm the F code (sub-address) and password of the target relay station.
1
Select the [Fax/Internet Fax Options] tab to display the [Fax/Internet Fax Options] screen.
2
Select [F Code].
3
Select [On].
4
Select the [F Code] box, and enter the F code with the numeric keypad.
Note
You can enter up to 20 digits for the F Code.
Relay
Broadcast
Relay Broadcast
The number of digits of the relay station ID:
1: When the relay station IDs and address numbers are two digits
2: When the relay station IDs and address numbers are three digits
Print Directive
Printing/not printing at the relay station
Print Relay
Directive Station ID
Up to 20 digits
Address Address
Number Number
Broadcast
4
Address ....
Number
289