Scan To Pc; Transfer Protocol (Selecting A Transfer Protocol) - Fuji Xerox ApeosPort-VI C7771 User Manualline

Scan to PC

This section describes the procedure to select features on the [Scan to PC] screen. The Scan
to PC service allows you to scan documents and send the scanned data to a network
computer via the FTP or SMB protocol. The following describes features available on the
[Scan to PC] tab.
Note
Before scanning, you must create a shared folder on your computer to save scanned data in. Furthermore, if
you use the FTP protocol, you must set the FTP service. For information on the computer settings, refer to the
documentation provided with your operating system or the official website of the respective company. For
information on supported operating systems, refer to "Appendix" > "Specifications" in the Administrator
Guide.
Scan to My Folder feature in which the scanned document can be transferred to a different destination
according to an authenticated user when you select [Scan to PC] on the [Service Home] screen. The
authenticated user's information such as the user name or storage location of the scanned document, is
automatically determined and displayed.
Reference
You can customize the layout of the features displayed on the [Scan to PC] screen. For more information, refer to "Tools" > "Scan
Service Settings" > "Screen Defaults" > "1st Tab - Features Allocation" in the Administrator Guide.
You can set [First Tab] or [Address Book] for the screen displayed when you select [Scan to PC] on the Service
Home screen. For more information, refer to "Tools" > "Scan Service Settings" > "Screen Defaults" > "Scan to
PC Screen Default" in the Administrator Guide.
1
Select [Scan to PC] on the Services Home screen.
2
Select a feature on the [Scan to PC] screen.
Note
Depending on the settings for [Scan to PC Screen Default] in the System Administration mode, the [Server
Address Book] screen is displayed. For more information, refer to "Tools" > "Scan Service Settings" > "Screen
Defaults" > "Scan to PC Screen Default" in the Administrator Guide.
Fields displayed on the screen vary depending on the protocol you have selected.

Transfer Protocol (Selecting a Transfer Protocol)

You can select a transfer protocol using the following procedure.
Scan to PC
5
359