Step 3 Entering A Quantity; Step 4 Starting The Copy Job - Fuji Xerox ApeosPort-VI C7771 User Manualline

Step 3 Entering a Quantity

You can enter up to 999 sets.
1
Enter the number of copies using the numeric keypad.
The number of copies entered appears on the upper right of the touch screen.
2
If you have entered an incorrect value, press the <C (Clear)> button and then enter the
correct value.

Step 4 Starting the Copy Job

1
Press the <Start> button.
Important
If the document has been loaded in the document feeder, do not hold down the document while it is being
conveyed.
Copies cannot be made if a copy protection code is detected. For information on copy protection codes, refer
to "Secure Watermark (Managing Document Security)" (P.160).
Note
If a problem occurs, an error message appears on the touch screen. Follow the instructions of the message to
solve the problem.
You can set the next job during copying.
If you have more documents
If you have more documents to copy, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to scan the documents as a single set of
data.
2
Select [Next Original] while scanning is in progress.
Note
When using the document feeder, load the next document after the machine has finished scanning the first
document.
When [Next Original] is displayed on the screen and no operation is performed for a certain period of time,
the machine automatically assumes that there are no more documents.
You can change the number of copies by selecting [Change Quantity] that is displayed after selecting
[Delete].
Copying Procedure
3
85