Fuji Xerox ApeosPort-VI C7771 User Manualline page 492

Job Status
An entire preview image is displayed.
In the entire view, the file name, Stored Date, Pages, and setting values of Staple and Hole
Punch are displayed on the right side of the preview area.
Double-tap the preview area to move to the enlarged view.
A previewed image is enlarged or reduced.
In the enlarged view, the following operations are available:
Print Quantity
11
Specifies the number of print sets.
Output Color
Displays the output color of the document to be printed.
2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
Note
492
(Entire view)
(Enlarged view)
Drag or flick the enlarged image to move the position to be displayed.
Double-tap the previewed image to change the ratio of the image size.
Drag the slider to change the ratio of the image size.
This item is displayed when the booklet layout is set using a printer driver.
When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.