Fuji Xerox ApeosPort-VI C7771 User Manualline page 272

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Select [On].

Select the [F Code] box, and enter an F code using the displayed keyboard or the numeric

If necessary, select the [Password] box, and enter a password using the displayed keyboard

or the numeric keypad.

The F code transmission is not used.

The F code transmission is used. Enter the F Code.

Select the [F Code] box, and enter the F code using the displayed keyboard or the numeric

Select the [Password] box, and enter the password using the displayed keyboard or the

numeric keypad. If a password is not set, leave this box blank.

Enter the F code or the password using the displayed keyboard.

Specify a destination, and then press the <Start> button.

You can enter up to 20 digits for the F code.

You can enter up to 20 digits for the password.

You can enter up to 20 digits for the F Code.

You can enter up to 20 digits for the password.

For information on how to enter characters, refer to "Entering Text" (P.77).