Importing Using Stored File Manager 3 - Fuji Xerox DocuCentre-IV C2263 User Manual

Import method for scanned files
You can change the display and the import
settings for files scanned from a folder.
To change the import method, click [Import
Settings] from [File] menu in the file selection
dialog box, and configure the settings in the
dialog box that appears.

Importing Using Stored File Manager 3

The following describes how to use Stored File Manager 3 to import files from a machine's
folder.
Stored File Manager 3 is software to import files from a machine's folder to a computer
without using any client-side application.
To use Stored File Manager 3, your computer must have Network Scanner Utility 3 installed.
Note
To import files stored in a folder, prior settings are required, such as enabling ports. For more information, refer to "9 Scanner
Environment Settings" > "Configuration of Store to Folder" in the Administrator Guide. For information on the operation of
the application, refer to the documentation provided with the application.
For information on how to install Stored File Manager 3, refer to the manual included in the Driver CD Kit.
To learn about fields in the displayed dialog box, click [Help] to view the Stored File Manager 3 help.
1
Click [Start] and select [Programs] > [Fuji Xerox] > [Network Scanner Utility 3] > [Stored File
Manager 3].
Note
2
From the displayed list, click the scanner name of
the machine, and click [Next].
Note
3
In the [Folder Number] field, enter the number of
the folder (001 - 200) that contains the file to be
imported. In the [Passcode] field, enter a
passcode (up to 20 digits).
Note
4
Click [Confirm].
• Install Network Scanner Utility 3 from the Driver CD Kit.
• If you used another directory for installation, specify the directory instead.
• If no scanners are shown in the list, click [Search
Again]. The application searches for scanners.
• To change the display of scanner names, use
the dialog box that appears by clicking [Search/
Display Settings]. For more information, refer to
"Changing the display of scanner names"
(P.418).
• Only when the machine is connected to the
network, the scanner name is automatically
listed. To view the machine connected to
another network, click [Search/Display Settings] and register the IP address and scanner name. For
information on how to change the settings, refer to "Changing the display of scanner names"
(P.418).
• You can also select a folder number from
[Registered Folders].
• Clicking [Select Scanner] returns to step 2,
where you can reselect a scanner.
Importing Scanned Data
417
11