Fuji Xerox ApeosPort-VI C7771 User Manualline page 166

Hide thumbs Also See for ApeosPort-VI C7771:

Table of Contents

Select [Copy Output].

Select any option.

Copies are collated when the originals are loaded in the document feeder.

Copies are also collated when originals are loaded on the document glass and any of the

following features is used: 2 Sided Book Copying, Covers, Booklet Creation, Stapling, Build

Job, Sample Set, and Combine Original Sets.

The machine outputs sheets sorted into sets that are arranged in page order.

The machine outputs the specified number of copies and sorts sheets by page.

Uncollated with Separators

The machine outputs copies with inserting blank sheets as a separator and sorts sheets by

Separator Tray

When you select [Uncollated with Separators], select the paper tray to be used for the

Specify the position for stapling. The number of sheets that can be stapled is 2 to 50 (when

80 gsm paper is used). If the C3 Finisher Staple Unit 65 Sheets (optional) is installed, the

maximum number of sheets that can be stapled is 65 (when 90 gsm paper is used and

thickness of bundled paper is 5.7 mm or less). Available paper types are as follows:

When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.102).