Step 3 Starting The Scan Job - Fuji Xerox ApeosPort-VI C7771 User Manualline

5
Select each tab, and configure features as necessary.
Reference
The following shows the reference section for each tab.
"Store to Folder" (P.374)
"Advanced Settings" (P.391)
"Layout Adjustment" (P.396)
"E-mail Options/Filing Options" (P.405)
When you use another Scan service, [Store to Folder] is replaced with [E-mail], [Network Scanning], [Scan to
PC], [Store to USB], [Store & Send Link], or [Store to WSD].
The following shows the reference section for each service.
"E-mail" (P.320)
"Scan to PC" (P.359)
"Store to USB" (P.376)
"Store & Send Link" (P.384)
"Network Scanning" (P.356)
"Store to WSD" (P.387)
Note
WSD stands for Web Services on Devices.

Step 3 Starting the Scan Job

The following describes how to start a scan job.
Reference
For information on how to start a scan job on the [Store to WSD] screen, refer to "Store to WSD" (P.387).
Note
WSD stands for Web Services on Devices.
1
Press the <Start> button.
Important
If the document has been loaded in the document feeder, do not hold down the document while it is being
conveyed.
If a copy protection code is detected, the machine will not scan the document.
Note
If a problem occurs, an error message appears on the touch screen. Solve the problem according to the
message.
You can set the next job during scanning.
Scanning Procedure
5
309