Step 3 Specifying Destinations - Fuji Xerox ApeosPort-VI C7771 User Manualline

4
Select each tab, and select a feature as necessary.
Reference
When you press the <Power Saver> button while configuring the features, you can select whether to enable the 2 Sided (Skip Blank
Pages) feature. For more information on [2 Sided (Skip Blank Pages)], refer to "2 Sided (Skip Blank Pages)" (P.244).
The following shows the reference section for each tab.
Reference
"Fax/Internet Fax" (P.224)
"Layout Adjustment" (P.246)
"Fax/Internet Fax Options" (P.254)
"More Options" (P.278)

Step 3 Specifying Destinations

Three methods are available to specify recipients: by phone number, by address number,
and by group dial number. The following shows input methods supported by each method.
Phone Number
Address Number
(Speed Dialing)
Group Dial Number
O : Available
X : Not available
* : There are two ways in which address numbers and stored programs are assigned to the one-touch buttons. Select either of the
following:
[Type 1]
The buttons 1 to 70 are used for address numbers and they correspond to the registered
address numbers 0001 to 0070, while the buttons M01 and M02 are used for stored
programs and they correspond to the registered stored programs 1 and 2.
[Type 2]
The buttons 1 to 60 are used for address numbers and they correspond to the registered
address numbers 0001 to 0060, while the buttons 61 to 70, M01, and M02 are used for
stored programs and they correspond to the registered stored programs 1 to 12.
Numeric Keypad One-Touch buttons
O
4 digits (0001 to 2 digits (1 to 70) or (1 to
2000)
3 digits + *
(nnn0 to nnn9)
2 digits + *
(nn00 to nn99)
# + 2 digits
Address Book
X X
From the list tab
60)* and index
X O
Fax Procedure
4
191