Step 2 Selecting Features - Fuji Xerox ApeosPort-VI C7771 User Manualline

Copy

Step 2 Selecting Features

The following two services are available to copy documents.
Simple Copy
Allows you to only select basic features to copy documents.
Copy
Allows you to make detailed settings to copy documents.
The following describes how to select features on the [Copy] screen.
Reference
Note
3
1
Press the <Services Home> button.
2
Select [Copy].
3
If the previous settings still remain, press the <Clear All> button.
4
Select each tab, and configure features as necessary.
The following shows the reference section for each tab.
Reference
84
For information on Simple Copy, refer to "Simple Copy" (P.90).
The features displayed on the screen depend on the configuration of your machine.
When the Authentication or Accounting feature is enabled, a user ID and passcode may be required. Ask your
system administrator for the user ID and passcode.
"Copy" (P.96)
"Image Quality" (P.112)
"Layout Adjustment" (P.120)
"Output Format" (P.138)
"Job Assembly" (P.173)