Specifying A Destination Using The Redial Feature - Fuji Xerox ApeosPort-VI C7771 User Manualline

2
Specify a recipient with up to 128 characters using the keyboard displayed on the touch
screen.
Note
When the Server Fax service is used, a destination must be less than 50 characters long. The available
characters are as follows:
0 to 9
-
#
\
S
:
=
+
(Space)
For more information, refer to the documentation provided with the Server Fax Kit.
Note
Even though a line is specified in the above keyboard screen, when the lines are specified by selecting [Line
Selection] in the [Fax /Internet Fax] screen, a fax job will be transmitted in the setting of [Line Selection]. For
more information, refer to "Specifying a line (port) using [Line Selection]" (P.239).

Specifying a Destination Using the Redial Feature

You can specify recipients using the Redial feature.
Important
When transmission to a certain recipient is prohibited in the System Administration mode, the [Redial list]
button cannot be used.
1
Select [Redial List].
Numeric characters
Pause
A starting character for a group number
A delimiter for private data. Using this character before and after private data hides
the destination string.
A character for password verification
DTMF signal
A character to wait for dial tones
Available, but ignored
Available, but ignored
Fax/Internet Fax
4
237