Fuji Xerox ApeosPort-VI C7771 User Manualline page 60

Product Overview
7 Push-button power switch
Switches the power of the machine on and off.
Reference
8 <Interrupt> button
Press this button to suspend a copy or print job in progress to have the machine process
another job. During the Interrupt mode, the <Interrupt> button lights up. Pressing the
<Interrupt> button again exits the Interrupt mode and resumes the suspended job.
Reference
9 <Clear All> button
Returns the settings you made to the default values. The machine returns to the same state
as when it is powered on.
10 <Stop> button
2
Press this button to pause the current job or communications.
11 <Start> button
Press this button to start scanning a document.
12 <Main Power> indicator
Lights up when the main power is switched on.
Note
13 <Error> indicator
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error occurs with the machine,
including paper jams and running out of paper or toner.
Reference
14 <Data> indicator
Blinks when the machine is sending or receiving data to or from a client.
This indicator lights up when data is stored in the machine's memory, when received faxes
are waiting to be printed, or when faxes are stored in a folder.
Reference
15 <Speed Dial> button
Press this button to specify a recipient with an address number when sending a fax or e-
mail.
16 <C (Clear)> button
Press this button to cancel a numerical value you have entered with the numeric keypad.
17 <Dial Pause> button
Press this button to insert a pause into a destination number.
60
Refer to "Power Source" (P.49).
For notes and restrictions on the Interrupt mode, refer to "Appendix" > "Notes and Restrictions" > "Notes and Restrictions on the
Interrupt Mode" in the Administrator Guide.
If the main power is not switched on, the machine will not be powered on even when the power is switched
on.
If the <Error> indicator blinks, contact our Customer Support Center.
If the <Error> indicator lights up, refer to "Problem Solving" > "Machine Trouble" in the Administrator Guide.
You can check stored scan files in a Folder List. For information on the Folder List, refer to "Machine Status" > "Machine
Information" > "Print Reports" > "Folder List" in the Administrator Guide.
You can check stored fax files in a Stored File List. For information on the Stored File List, refer to "Machine
Status" > "Machine Information" > "Print Reports" > "Job Status/Activity Report" > "Stored File List" in the
Administrator Guide.
You can change the lighting pattern of the <Data> indicator. For more information, refer to "Tools" >
"Common Service Settings" > "Other Settings" > "Data Indicator" in the Administrator Guide.