Fuji Xerox ApeosPort-VI C7771 User Manualline page 453

1
Select [Change Settings].
2
Select the [Job Assembly] tab.
3
Select [Stored Programming].
4
Select a number of a stored program containing the features you want to use.
Note
You can only select registered numbers.
After the stored program has been called, the machine sounds an audible tone. If a failure occurs, the
machine sounds a fault tone.
Reference
For information on how to change the volume of the sound that notifies that a stored program has been called, refer to "Tools" >
"Common Service Settings" > "Audio Tones" > "Stored Programming Complete Tone" in the Administrator Guide.
Calling a Stored Program
453
8