Facsimile Information Services; Using The Receiver - Fuji Xerox ApeosPort-VI C7771 User Manualline

Fax

Facsimile Information Services

For information on subscriptions and advanced operating procedures, contact the
corresponding facsimile information service.

Using the Receiver

1
Pick up the telephone receiver.
4
2
Select [Manual Receive] from the drop-down menu.
3
Specify the fax number of the facsimile information service.
You can use the numeric keypad, address numbers, or one-touch buttons to specify the
call destination, but cannot use the Address Book.
You can use the keyboard displayed on the screen to specify the call destination.
Selecting [More Characters] on the screen displays symbols.
Note
4
When the machine connects to the service, you will hear voice prompts. Follow the voice
prompts to enter the required numbers.
5
After entering the numbers, press the <Start> button.
Note
6
Place the receiver back in the cradle.
Important
298
When the line type is set to a tone line, [:] (Tone) is not displayed on the screen. If you want to send tones (or
to use the touch-tone services) while using a pulse line, select [:] (Tone).
Some touch-tone services may not be available even if you set your telephone to send tones.
The <Data> indicator lights up on the control panel, and reception begins.
Make sure to place the receiver back in the cradle properly. Otherwise, the line will remain "busy".