Parker EME
3. Compax3F device description
3.1
State of delivery
3.2
Plug and connector assignment Compax3 Fluid
Analog Input (plug X1)........................................................................................................16
Analog Output (plug X2) .....................................................................................................17
Voltage supply (plug X3) ....................................................................................................18
Feedback (connector X13) .................................................................................................22
Mounting and dimensions ..................................................................................................23
3.2.1.
Meaning of the front panel LEDs (via X10)
State of delivery..................................................................................................................13
Compax3 is delivered without configuration!
After switching on the 25VDC supply, the red LED is flashing while the green LED
is dark.
Please configure the device with the help of the Windows-Software "Compax3 -
ServoManager"!
status
Voltages missing.
While booting.
No configuration present.
Compax3 IEC61131-3 program not compatible with Compax3 Firmware.
no Compax3 IEC61131-3 program.
Axis(es) blocked.
Axis(es) enabled.
Axis in fault status / fault present.
192-121100 N6 June 2008
Compax3F device description
LED
LED
red
green
off
off
alternately flashing
flashing
off
off
Flashes slowly
off
on
on
off
13