Relay Configuration - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065

9.3.1 Relay configuration

In this menu, you can configure the port mode.
Physical Interfaces
Fig. 56:
The Physical Interfaces->Relay->Relay Configuration menu consists of the following
fields:
Fields in the Relay ConfigurationBasic Parameters menu
Field
Port mode
Relay Relay Configuration
-> ->
Description
Possible values:
• Inactive (default value): The relay is manually set to always
open.
• Active: The relay is manually set to always closed.
• Alarm relay: The relay is automatically coupled with the
red error LED.
9 Physical interfaces
125