Configuration; Access To The Web-Based Configuration Program - Funkwerk W500 User Manual

3

Configuration

W500 allows IP configuration via the ComPoint Manager and detailed set-
up with a web browser.
3.1 Access to the Web-based
Configuration Program
If you do not wish to use the fixed
the ComPoint Manager software. You can find it on the product CD or on our
website. ComPoint Manager allows you to localize
without difficulty and define another IP address suitable for the network. The
use of ComPoint Manager is explained in the documentation for this tool.
Not all functions of FEC ComPoint Manager are available for W500. The
localization of devices in the network and the IP configuration of FEC devices
Note are supported. Please note that
WLAN management software applications WILMA or WMS.
The following instructions guide you through the installation of
example of its preset IP address.
1. Connect your computer wireless or via a cable to W500. Please set a fixed
IP address on your computer. It must be in the range 192.168.0.X, whereby
"X" must not be 254 or 252. If you wish to establish a wireless connection,
you first have to set the configuration described below in the computer.
– SSID: Funkwerk-ec
– C
HANNEL
– WLAN
– O
PERATION MODE
– WLAN: ON
2. Open your web browser, in the address field enter the
and press Enter. The
W500 IP address192.168.0.252, please install
W500 is not compatible with the Funkwerk
: 6
: disabled
SECURITY
: AP
W500 standard address is http://192.168.0.252.
Configuration
W500 within your network
W500 with the
W500 IP address
User Manual
3
15