Wds - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Field
Noise dBm
SNR dB
Data Rate Mbps
Rate
Tx Packets
Rx Packets

19.4.3 WDS

In the Monitoring -> WLAN -> WDS menu, the current values and activities of the con-
figured WDS links are shown.
Description
Shows the received noise strength in dBm.
Signal-to-Noise Ratio in dB is an indicator of the quality of the
wireless connection.
Values:
• > 25 dB excellent
• 15 – 25 dB good
• 2 – 15 dB borderline
• 0 – 2 dB bad.
Shows the current transmission rate of data received by this cli-
ent in Mbit/s. The following transmission rates are possible:
IEEE 802.11b: 11, 5.5, 2 and 1 mbit; IEEE 802.11g/a:
54,48,36,24,18,12,9,6 mbit. If the 5 GHz frequency band is
used, the display of 11, 5.5, 2 and 1 mbit is suppressed for
IEEE 802.11b.
Displays the possible data rates on this wireless module.
Shows the number of sent packets for the data rate.
Shows the number of received packets for the data rate.
19 Monitoring
365