Dhcp Server; Dhcp Pool - Funkwerk W1002 Manual

16 Local services
306
Field
Update Interval

16.3 DHCP Server

You can configure your device as a DHCP (Dynamic Host Configuration Protocol) server.
Your device and each PC in your LAN requires its own IP address. One option for allocat-
ing IP addresses in your LAN is the Dynamic Host Configuration Protocol (DHCP). If you
configure your device as a DHCP server, the device automatically assigns IP addresses to
requesting PCs in the LAN from a predefined IP address pool. A PC sends out an ARP re-
quest and in turn receives its IP address assigned by your device. You therefore do not
need to allocate fixed IP addresses to PCs, which reduces the amount of configuration
work in your network. To do this, you set up a pool of IP addresses, from which your device
assigns IP addresses to hosts in the LAN for a defined period of time. A DHCP server also
transfers the addresses of the domain name server entered statically or by PPP negotiation
(DNS), NetBIOS name server (WINS) and default gateway.

16.3.1 DHCP Pool

To activate your device as a DHCP server, you must first define IP address pools from
which the IP addresses are distributed to the requesting clients.
In the Local Services->DHCP Server->DHCP Pool menu, a list of all configured IP ad-
dress pools is shown.
Funkwerk Enterprise Communications GmbH
Description
• DynDNS (default value)
• Static DynDNS
• ODS
• HN
• DYNS
• Gnudip-HTML
• Gnudip-TCP
• Custom DynDNS
Enter the minimum time (in seconds) that your device must wait
before it is allowed to propagate its current IP address to the
DynDNS provider again.
The default value is 300 seconds.
bintec W1002/W1002n/W2002/WIx040/WIx065