Modify System Password - Funkwerk W1002 Manual

4 Basic configuration
20
Funkwerk Configuration Interface
Fig. 9:
Start the configuration interface as follows:
(a) Enter the IP address of your device in the address line of your Web browser.
With DHCP server:
• the IP address that the DHCP server assigned to your device
Without DHCP server:
• With direct connection to the configuration PC: the fallback IP address
192.168.0.252
• The fixed IP address assigned via the ComPoint Manager
Press the Enter (Return) key .
(b) Enter admin in the User field and funkwerk in the Password field.

4.5 Modify system password

All bintec devices are delivered with the same username and password. As long as the
password remains unchanged, they are therefore not protected against unauthorized use.
Make sure you change the passwords to prevent unauthorized access to your device!
Proceed as follows:
(a) Go to System Management -> Global Settings-> Passwords
(b) Enter a new password under System Admin Password .
(c) Enter the new password again under Confirm Admin Password .
Funkwerk Enterprise Communications GmbH
Login
bintec W1002/W1002n/W2002/WIx040/WIx065