Relay Configuration - Funkwerk W1002 User Manual

6 Physical Interfaces
110

6.2.1 Relay configuration

In this menu, you can configure the port mode.
Physical Interfaces
Fig. 53:
The Physical Interfaces -> Relay-> Relay Configuration menu consists of the following
fields:
Fields in the General menu
Field
Port mode
Funkwerk Enterprise Communications GmbH
Relay Relay Configuration
-> ->
Description
Possible values:
• (default value) The relay is manually set to always open.
• : The relay is manually set to always closed.
• : The relay is automatically coupled with the
red error LED.
funkwerk W1002/W2002/WIx040/WIx065