Table of Contents
Advertisement
19 Monitoring
368
Monitoring
WLAN
Fig. 175:
->
Values in the WDS list
Field
WDS description
Remote MAC
Uptime
Tx Packets
Rx Packets
Signal dBm
Noise dBm
Data Rate Mbps
Rate
19.4.4 Bridge Links
In the Monitoring -> WLAN -> Bridge Links menu, the current values and activities of the
bridge links are shown.
Funkwerk Enterprise Communications GmbH
WDS
<WDS Link>
->
->
Description
Shows the name of the WDS link.
Shows the MAC address of the WDS link partner.
Shows the time in hours, minutes and seconds for which the
WDS link in question is active.
Shows the total number of packets sent.
Shows the total number of packets received.
Shows the received signal strength in dBm.
Shows the received noise strength in dBm.
Shows the current transmission rate of data received on this
WDS link in Mbit/s.
Shows separately, for each of the stated data rates, the values
for Tx Packets and Rx Packets.
bintec W1002/W1002n/W2002/WIx040/WIx065
bintec W1002n
->
in
Hide quick links:
Advertisement
Table of Contents
