9 Physical interfaces
120
9.2.1 Serial Port
You can make settings for the serial interface in the Physical Interfaces->Serial
Port->Serial Port menu.
Physical Interfaces
Fig. 54:
The Physical Interfaces->Serial Port->Serial Port menu consists of the following fields:
Fields in the Serial PortGeneral menu
Field
Port mode
If the Data Port option is selected for the Port Mode, an extra configuration section
opens.
Funkwerk Enterprise Communications GmbH
Serial Port
Serial Port
->
->
Description
Select in which mode the serial interface is to be used.
Possible values:
• Configuration (default value): The serial interface is used
as a console.
• Data port: The serial interface is operated as a data inter-
face, Serial over IP is used.
bintec W1002/W1002n/W2002/WIx040/WIx065