Qos - Funkwerk W1002 Manual

15 Firewall
280
Field
Data Traffic Priority

15.1.2 QoS

More and more applications need increasingly larger bandwidths, which are not always
available. Quality of Service (QoS) makes it possible to distribute the available bandwidths
effectively and intelligently. Certain applications can be given preference and bandwidth re-
served for them.
In the Firewall -> Policies -> QoS menu, a list of all QoS rules is shown.
15.1.2.1 New
Choose the New button to set up new QoS rules.
Funkwerk Enterprise Communications GmbH
Description
If QoS is not activated for this policy, bear in mind that the data
cannot be prioritised on the sender side either.
A policy for which QoS has been enabled is also set for the fire-
wall. Make sure therefore that data traffic that has not been ex-
pressly authorised if blocked by the firewall!
Only for Apply QoS = enabled
Select the priority with which the data specified by the policy is
handled on the send side.
Possible values:
• None (default value): No priority.
• Low Latency: Low Latency Transmission (LTT), i.e. hand-
ling of data with the lowest possible latency, e.g. suitable for
VoIP data.
• High
• Medium
• Low
bintec W1002/W1002n/W2002/WIx040/WIx065