Rip Options - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Field
Metric Offset on Inter-
face dormant

12.3.3 RIP Options

Routing RIP RIP Options
Fig. 88: -> ->
The Routing -> RIP -> RIP Options menu consists of the following fields:
Fields in the RIP Options Global RIP Parameters menu
Field
RIP UDP Port
Default Route Distribu-
Description
The default value is 0.
Select the value to be added to the route metric if the status of
the interface is "dormant". During export, the value is added to
the exported metric if the interface status is "dormant".
Possible values are -16 to 16.
The default value is 0.
Description
The setting option UDP port, which is used for sending and re-
ceiving RIP updates, is only for test purposes. If the setting is
changed, this can mean that your device sends and listens at a
port that no other devices use. The default value 520 should be
retained.
Select whether the default route of your device is to be propag-
12 Routing
195