Forwarding - Funkwerk W1002 Manual

12 Routing
202
Tip
With multicast, the focus is on excluding data traffic from unwanted multicast groups.
Note that if forwarding is combined with IGMP, the packets can be forwarded to the
groups specified in the forwarding request.

12.5.1 Forwarding

In this menu, you specify which multicast groups are always forwarded between the inter-
faces of your device.
12.5.1.1 New
Choose the New button to create forwarding rules for new multicast groups.
Routing Multicast
Fig. 90: ->
The Routing->Multicast->Forward->
Fields in the Forward Basic Parameters menu
Field
All Multicast Groups
Funkwerk Enterprise Communications GmbH
Forward /New
-> ->
/New menu consists of the following fields:
Description
Select whether all multicast groups, i.e. the complete multicast
address range 224.0.0.0/4, are to be forwarded from the defined
Source Interface to the defined Destination Interface To do
bintec W1002/W1002n/W2002/WIx040/WIx065