Chapter 1 Introduction - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065

Chapter 1 Introduction

The new generation access points are manufactured in an environmentally friendly way
and meet the RoHS directive. They support the latest WLAN technology and are designed
for use particularly in the professional environment.
Safety notices
The safety precautions brochure, which is supplied with your device, tells you what you
need to take into consideration when using your access point.
Installation
How to connect your device is shown in chapter
Configuration
Chapter Basic configuration
for configuration. You will then be shown how you can access your device from a Windows
PC using a current web browser and how to make basic settings.
Password
If you are familiar with the configuration of bintec devices and you want to get started right
away, all you really need to know is the preset user name and password.
User Name: admin
Password: funkwerk
Caution
Remember to change the password immediately when you log in to the device for the
first time. All bintec devices are supplied with the same password, which means they
are not protected against unauthorised access until you change the password. How to
change the passwords is described in chapter
Possible Applications
To meet the different requirements relating to the various tasks, the access points have
one, two or three wireless modules and two, three or four antennas, depending on the
model, in order to optimise the range or illumination of the radio range even under difficult
conditions. The wireless module offers operation modes Client, Access Point and Bridge.
Installation
on page 13 also tells you what preliminary tasks are necessary
Modify system password
on page 6.
on page 20.
1 Introduction
1