Client Link - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Field
Fields in the Remote Partner menu
Field
Remote MAC address

11.1.4 Client Link

If you operate your device in access client mode (Wireless LAN -> WLANx -> Radio Set-
tings-> ->Operation Mode = Access Client), you can edit the available Client Links
in the Wireless LAN->WLANx->Client Links->
The client mode can be operated in infrastructure mode or in ad-hoc mode.
In a network in infrastructure mode, all clients communicate with each other via access
points only. There is no direct communication between the individual clients.
In ad-hoc mode, an access client can be used as central interface between a number of
terminals. In this way, devices such as computers and printers can be wirelessly intercon-
nected.
Description
If the entry starts with 0x, the generator is deactivated. Enter
a hexadecimal string with exactly the right number of charac-
ters for the selected WEP mode. 10 characters for WEP40 or
26 characters for WEP104 e.g. WEP40: 0xA0B23574C5,
WEP104: 0x81DC9BDB52D04DC20036DBD831
• Direct entry of ASCII characters
Enter a character string with the right number of characters for
the selected WEP mode. For WEP40 you need a string of 5
characters, WEP104 13 characters. For example hello for
WEP40, funkwerk-wep1 for WEP104.
Description
Enter the MAC address of the WDS partner.
-> menu.
11 Wireless LAN
163