Configuration Options - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Funkwerk Configuration Interface
Log in via the HTML surface as follows:
(1) Enter your user name in the User field of the input window.
(2) Enter your password in the Password field of the input window and confirm with Re-
turn or click the Login button.
The status page of the Funkwerk Configuration Interface opens in the browser.
SNMP shell
Log into the SNMP shell as follows:
(1) Enter your user name e.g. admin, and confirm with Return.
(2) Enter your user password e.g. funkwerk, and confirm with Return.
Your device logs in with the input prompt, e.g. w1002:>. The login was successful. You are
now in the SNMP shell.
To leave the SNMP shell after completing the configuration, enter exit and press Return.

7.3 Configuration options

This chapter first offers an overview of the various tools you can use for configuration of
your device.
You can configure your device in the following ways:
• Funkwerk Configuration Interface for advanced users
• Setup Tool for experts
• SNMP shell commands
The configuration options available to you depend on the type of connection to your device:
Types of connections and configurations
Type of connection
LAN
Serial connection
Therefore, several types of configuration are available for each type of connection.
Possible types of configuration
Funkwerk Configuration Interface , ASCII Setup Tool, shell
commands
ASCII Setup Tool, shell commands
7 Access and configuration
59