Reboot; System Reboot - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Field
Select File
New Filename

17.3 Reboot

17.3.1 System Reboot

In this menu, you can trigger an immediate reboot of your device. Once your system has
restarted, you must call the Funkwerk Configuration Interface again and log in.
Pay attention to the LEDs on your device. For information on the meaning of the LEDs, see
the Technical Data chapter of the manual.
Note
Before a reboot, make sure you confirm your configuration changes by clicking the
Save Configuration button, so that these are not lost when you reboot.
Maintenance Reboot
Fig. 151: ->
If you want to restart your device, click on the OK button. The device will immediately re-
Description
Only if Action = Rename, Delete configuration or De-
lete file: Select the file or configuration to be renamed or
deleted.
Only for Action = Rename: Enter the new name of the configur-
ation file.
System Reboot
->
17 Maintenance
337