Relay - Funkwerk W1002 Manual

9 Physical interfaces
124
Field
Inter-ByteGap
Fields in the Serial PortBuffer menu
Field
Delete serial RX buffer
Delete serial TX buffer

9.3 Relay

Devices of the WI series are fitted with a relay. The rest (i.e. normal/unexcited/fault) state
of the contacts is open. You can choose whether the relay is manually controlled or used
as an alarm relay, coupled with the red error LED. When manually controlled, the state of
the relay is set during booting when the configuration is loaded.
Funkwerk Enterprise Communications GmbH
Description
The function is enabled by default.
Possible values: 0 65535. Default value: 0.
Enter the time in ms since receiving the first character, which is
used as a trigger for data transmission.
The function is activated with Enabled.
The function is disabled by default.
Possible values: 0 65535. Default value: 100.
Description
Click the Delete button to clear the receive buffer.
Click the Delete button to clear the send buffer.
bintec W1002/W1002n/W2002/WIx040/WIx065