The Setup Tool For Experts - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
External Reporting
Menu
Syslog
IP Accounting
E-mail alert
SNMP
Activity Monitor
Monitoring menus
Menu
Internal Log
IPSec
Interfaces
WLAN
Bridges

7.3.2 The Setup Tool for experts

The Setup Tool is a menu-controlled ASCII tool for the configuration and administration of
your device and, in addition to the SNMP commands, also allows access to all the configur-
ation parameters.
To start the Setup Tool, you can be connected to the device in any way you like: It does not
matter whether you connect to the device via the LAN or via a serial connection.
Function
In this menu, you configure the host to which the data logged in-
ternally on the device is forwarded for saving and further pro-
cessing.
In this menu, you decide for which interfaces accounting mes-
sages are to be generated.
Depending on the configuration, in this menu e-mails are sent to
the administrator as soon as relevant syslog messages occur.
In this menu, you configure whether the device is to listen for
external SNMP accesses and send SNMP traps.
In this menu, you configure the surveillance of your device with
the Windows Tool Activity Monitor (component of BRICKware
for Windows).
Function
In this menu, the system messages are displayed.
In this menu, the IPSec connections and connection statistics
that are currently active are displayed.
In this menu, connection statistics and status of all interfaces
are displayed.
This menu shows you the WLAN connections statistics.
In this menu you can view the current values of the configured
bridges.
7 Access and configuration
73