Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Property
Printed documentation supplied
Online documentation
6.1.3 LEDs
The five LEDs show the radio status, radio activity, Ethernet activity and LED states of your
device. The LED states are indicated by combinations of the LEDs which are explained in
detail in this chapter.
They are arranged as follows:
bintec W1002
Fig. 11: LEDs of
bintec W1002n
Fig. 12: LEDs of
In operation mode, the LEDs display the following status information for your device:
LED status display
LED
State
State
off
on (static)
on (flashing)
WLAN (1/2)
on (flashing slowly)
on (static)
Value
Quick Reference
Safety notices
R&TTE Compliance Information
User's Guide
bintec W2002
and
Information
The power supply is not connected. If
other LEDs are on, also Error.
Error
Ready
Free
At least one client is registered
6 Technical data
31
Hide quick links:
Advertisement
Table of Contents
