System Licences - Funkwerk W1002 Manual

8 System management
94
Field
Internal Time Server

8.2.4 System Licences

This chapter describes how to activate the functions of the software licences you have pur-
chased.
The following licence types exist:
• Licences already available in the device's ex works state
• Free extra licences
• Extra licences at additional cost
The data sheet for your device tells you which licences are available in the device's ex
works state and which can also be obtained free of charge or at additional cost. You can
access this data sheet at www.funkwerk-ec.com
You can obtain the licence data for extra licences via the online licensing pages in the sup-
port section at www.funkwerk-ec.com
(Please also note the information on the licence card for licences at additional cost.) You
will then receive an e-mail containing the following data:
Funkwerk Enterprise Communications GmbH
Description
• Aggressive: For ten minutes, the system attempts to con-
tact the time server after 1, 2, 4, 8 seconds, and then every 10
seconds.
• Endless: For an unrestricted period, the system attempts to
contact the time server after 1, 2, 4, 8 seconds, and then
every 10 seconds.
Caution
If certificates are used to encrypt data traffic in a VPN, it is
extremely important that the correct time is set on the
device. To ensure this is the case, for Time Update Policy,
select the value Endless.
Select whether the internal time server is to be used.
The function is activated with Enabled. Time requests from a
client will be answered with the current system time. This is giv-
en as GMT, without offset.
The function is disabled by default. Time requests from a client
are not answered.
.
. Please follow the online licensing instructions.
bintec W1002/W1002n/W2002/WIx040/WIx065