Connections; Pin Assignments - Funkwerk W1002 Manual

6 Technical data
50
LED State
on
on (flickering)
SFP (green) off
on
on (flickering)
During the boot operation, only the red LED is on. The other LEDs then come on during
booting (if the units are initialised).

6.3.4 Connections

All connections are located on the underside of the device. bintec WI1065, WI2065 und
WI3065 have two Ethernet connections and one Serial interface.
The connections are arranged as follows:
bintec WI1065
Fig. 24: Underside of
bintec WIx065 underside
1 Socket for power supply
2 10/100 Base-T Ethernet interface
3 Reset button and delete configuration
4 SFP slot for 100 mbps fibre module (optional)
5 Serial interface RS232
6 Multimedia card (optional)
7 Alarm relay

6.3.5 Pin Assignments

Funkwerk Enterprise Communications GmbH
Information
Cable plugged in and link
Cable plugged in and link with data traffic
No data traffic
Data traffic via the SFP interface.
Cable plugged in and data traffic
WI2065 WI3065
, and
bintec W1002/W1002n/W2002/WIx040/WIx065