Snmp Shell - Funkwerk W1002 Manual

7 Access and configuration
80
Menu
Security
PPTP
IPSec
IP
PPP
CREDITS
QoS
GRE
L2TP
VLAN
Configuration Manage-
ment
Monitoring and Debug-
ging
Exit

7.3.3 SNMP shell

SNMP (Simple Network Management Protocol) is a protocol that defines how you can ac-
cess the configuration settings.
All configuration settings are stored in the MIB (Management Information Base) in the form
of MIB tables and MIB variables. You can access these directly from the SNMP shell via
SNMP commands. This type of configuration requires a detailed knowledge of our devices.
Funkwerk Enterprise Communications GmbH
Function
Service Provider (ISP). All the WAN partners entered are dis-
played in a list that includes the name of partner, protocol used
and current status.
In this menu, you configure the security features of your device,
e.g. access lists.
In this menu, you configure the an encrypted PPTP tunnel.
In this menu, you configure VPN connections over IPSec.
In this menu, you enter all the settings that concern the IP pro-
tocol.
This menu contains universal PPP settings, e.g. "Authentication
Protocol", which do not just relate to individual WAN partners.
In this menu, you manage your device's Credits Based Account-
ing System.
In this menu, you configure all the "Quality of Service" settings.
This menu shows a list of all configured GRE tunnels.
In this menu, you configure the use of the RealTime Streaming
protocol.
In this menu, you configure the VLANs.
In this menu, you can manage your device's configuration files.
You can save them either locally on your device or on your
computer, for example.
This menu includes sub-menus that enable you to locate prob-
lems in your network and monitor activities, e.g. at your device's
WAN interface.
You use Exit to leave the Setup Tool. You save the configura-
tion file in the flash memory with Exit-> Save as boot configur-
ation and exit. This file is loaded when you reboot your device.
Leave the Setup Tool without saving the configuration in the
flash memory with Exit -> Exit without saving.
bintec W1002/W1002n/W2002/WIx040/WIx065