Passwords - Funkwerk W1002 Manual

8 System management
88
Field
Maximum Message
Level of Syslog Entries
Maximum Number of Ac-
counting Log Entries

8.2.2 Passwords

Setting the passwords is another basic system setting.
Funkwerk Enterprise Communications GmbH
Value
The default value is 20. You can view the stored messages in
Monitoring ->Internal Log.
Select the priority of system messages above which a log
should be created.
System messages are only recorded internally if they have a
higher or identical priority to that indicated, i.e. all messages
generated are recorded at syslog level debug.
Possible values:
• Emergency: Only messages with emergency priority are re-
corded.
• Alert: Messages with emergency and alert priority are recor-
ded.
• Critical: Messages with emergency, alert and critical prior-
ity are recorded.
• Errors: Messages with emergency, alert, critical and error
priority are recorded.
• Warning: Messages with emergency, alert, critical, error and
warning priority are recorded.
• Notice: Messages with emergency, alert, critical, error,
warning and notice priority are recorded.
• Information (default value) Messages with emergency,
alert, critical, error, warning, notice and information priority are
recorded.
• Debug: All messages are recorded.
Enter the maximum number of accounting entries that are
stored internally in the device.
Possible values are 0 to 1000.
The default value is 20.
bintec W1002/W1002n/W2002/WIx040/WIx065